Chinese (Simplified)EnglishFrenchItalianPortugueseSpanish
|

Ocean Optics
Worldwide Headquarters
Largo, Florida, USA

+1 727-733-2447

[email protected]

Sales, Service
& Support Facility
Duiven, The Netherlands

EU:
+31 26-319-0500
FR:
+33 442-386-588

[email protected]

Ocean Optics GmbH Sales,
Service & Support Facility
Ostfildern, Germany

+49 711-34-16-96-0

[email protected]

Sales Support
for the
United Kingdom

+44 1865-819922

[email protected]

Sales, Service
& Support Facilities
Shanghai, PRC – Beijing, PRC

+86 21-6295-6600

[email protected]

Close

Order of operations for spectral calculations

Please follow these simple steps for spectral calculations:

  1. Set Integration Time
  2. Average multiple scans together (averaging will lower the overall noise for the subsequent steps)
  3. Subtract Dark (bias) — dark subtraction is important for linearity and stray light correction and has them as close to a zero baseline as is practicable.
    3.1. Enable Electrical Dark Correction (if available)
    3.2. Take a Dark and a Scope minus Dark
  4. Correct for detector non-linearity
  5. Correct for stray light (optional)
  6. Apply Boxcar Smoothing
  7. Take a new Dark subtraction
  8. Start measuring

REMEMBER: If you change the Integration Time or Averaging or Boxcar, you must take a new Dark (Bias) subtraction. This is done, while the Linearity Correction is enabled.

OceanView 1.6.7

OceanView 1.6.7

Real-time spectral acquisition and analysis
OmniDriver

OmniDriver

Cross-Platform Full-Featured Device Driver
SPAM

SPAM

Spectral Processing And Math Library
SeaBreeze

SeaBreeze

Embedded Open-Source Device Driver