Chinese (Simplified)EnglishFrenchItalianSpanish
|

Ocean Optics
Worldwide Headquarters
Largo, Florida, USA

+1 727-733-2447

info@oceanoptics.com

Sales, Service
& Support Facility
Duiven, The Netherlands

EU:
+31 26-319-0500
FR:
+33 442-386-588

info@oceanoptics.eu

Ocean Optics GmbH Sales,
Service & Support Facility
Ostfildern, Germany

+49 711-34-16-96-0

info@oceanoptics.eu

Sales Support
for the
United Kingdom

+44 1865-811118

info@oceanoptics.eu

Sales, Service
& Support Facilities
Shanghai, PRC – Beijing, PRC

+86 21-6295-6600

asiasales@oceanoptics.com

Close
Home > Frequently Asked Questions > Products > Oxygen Sensor Overcoat

Oxygen Sensor Overcoat

MGB is black in color and powerfully blocks ambient light and interference from sample color. It also helps protect against light physical abrasion [Note: You need to purchase a puncture accessory for any readings that require placement in stoppers or pushing through films such as thick agar gels.] and polar solvents. However, the MGB overcoat will not maintain a factory calibration for solvents, but your chemistry will not be compromised and you can perform two point calibrations on site. This overcoat will reduce resolution and is not recommended for 300 micron probes or use in oils.

In addition, MGB overcoat is recommended for:

  • colored samples
  • soil measurements
  • environments with auto-fluorescence
  • environments with high ambient light
  • polar organic solvents
  • Was this answer helpful?
  • Yes   No