DH-2000 Family

$4,057.00

Deuterium-Halogen Light Sources for the UV-Vis-NIR

Availability:
View Product Models

Item Wavelength Range UV Bulb  Shutter Filter Holder Remote Shutter Control
DH-2000-FHS-DUV-TTL 190-2500 nm Deep UV  x x x
DH-2000-S-DUV-TTL 190-2500 nm Deep UV x x
DH-2000-BAL 230-2500 nm Standard  x  x

Out of stock

The DH-2000 light source offers stable, continuous output from 215-2500 nm. Using a combination of deuterium and halogen lamps, the DH-2000 is ideal for measuring a sample that has multiple features in different spectral regions or for analyzing a variety of different samples in your lab. All models of the DH-2000 family include easy-to-replace bulbs, keeping your measurements going with fast lamp changes.

For those that need light into the deep UV, the DH-2000-FHS-DUV-TTL and DH-2000-S-DUV-TTL models include a special deep-UV deuterium lamp providing output from 190-2500 nm. Both models come with a shutter to limit the exposure of samples to the UV light.

The DH-2000-FHS-DUV-TTL comes with a filter holder for filters up to 25 mm square or 25 mm round in diameter and 4 mm in thickness, plus a shutter controlled via TTL signal or switch up to 5 Hz.

  • Two powerful light sources in a single optical path
  • Deep UV coverage and stable output from 190-2500 nm
  • Adjustable tungsten halogen power
  • Shutter limits the exposure of samples to UV light
  • Integrated filter holder holds optical filters to condition the light prior to coupling into the fiber optic cable
  • Models with TTL control allow the deuterium and halogen bulbs to be turned on/off individually and remotely

Included with the Product:

  • Power cord with adapters for U.S., EU countries, UK and Australia
  • UV safety goggles

Engineering Specifications DH-2000-DUV Series
Sources: Deep-UV Deuterium & Tungsten Halogen
Wavelength range: 190-2500 nm
Nominal bulb power: 26 W (deuterium)
20 W (tungsten halogen)
Typical output power: See chart below
Warm-up time:* 25 minutes
Source lifetime: 1,000 hours
Stability of light source output: ≤0.1%/hour @ 254 nm (deuterium)

≤0.1%/hour @ 700 nm (tungsten halogen)

Drift: ≤0.1%/hour @ 254 nm (deuterium)

≤0.1%/hour @ 700 nm (tungsten halogen)

Shutter: DH2000-S-DUV & DH2000-S-DUV-TTL only
Remote shutter control: DH2000-S-DUV-TTL only
Integrated filter holder: DH2000-FHS-DUV only
Operating temperature: 5 °C – 35 °C
Operating humidity: 5-95% without condensation at 40 °C
Power requirements: 85-264 V, 50/60 Hz
Power consumption: Approximately 78VA
Dimensions (W x H x L): 15 x 13.5 x 28.5 cm
Weight: 5 kg
Safety & regulatory: CE; ROHS, WEEE
Replacement bulbs: DH-2000-DUV-B (deuterium)
DH-2000-BH (tungsten halogen)

*  Warm-up time @23 °C ambient, free airflow, no vibrations

Output Power

The table below reports typical output power coupled into a 600 μm UV-VIS fiber and measured with an optical power meter integrated from 200-1100 nm.

Model Deuterium Bulb Only Tungsten Bulb Only
DH-2000-FHS 217 μW 295 μW
DH-2000-DUV 585 μW 990 μW

Shutter/Trigger Options

  • Available only for the listed models

Engineering Specifications DH2000-S-DUV-TTL
Trigger/shutter input signal: TTL; Up to 2.5 Hz maximum
Trigger/shutter connection: SUB-D-15 pin
Independent switching of deuterium and the halogen bulbs Yes, via TTL signal

Please use the following instructions for the following models manufactured in Germany.

PDF: DH-2000 (models: DH-2000, DH-2000-DUV, DH-2000-S, DH-2000-S-DUV, DH-2000-FHS)

Measurement Techniques in which this product is used:

DH2000 Family.xls