HPX-2000 Family

Prices may vary, see options below

High-powered, Continuous Xenon Light Sources

Availability:
View Product Models

Item Bulb Power Description
HPX-2000 35 W High power xenon light source with integrated shutter
HPX-2000-HP-DUV 75 W High power xenon light source with integrated shutter, enhanced UV output

Clear

The HPX-2000 is ideal for reflectance or florescence spectroscopy applications where often a strong source is required. The light has a 35 W xenon source and features an integrated filter holder to condition the light before it enters the fiber optic.

The HPX-2000-HP-DUV light source is much more intense, especially in the UV region. Driven by a 75 W source, the HPX-2000-HP-DUV provides output intensity that is almost 4x higher across the entire range compared to the output of the HPX-2000.

Both models have an integrated shutter that can be controlled by a a TTL signal or a switch on the front panel, allowing you to limit the exposure of the sample to this high intensity source.

  • Coverage from UV to Near-IR
  • High power source
  • Protect light-sensitive samples with an integrated shutter
  • The integrated filter holder conditions light before entering the fiber optic connection

Included with the Product:

  • Power cord
  • UV safety goggles

 

Engineering Specifications HPX-2000  HPX-2000-HP-DUV
Source: Continuous Xenon Continuous Xenon
Wavelength Range: 185 – 2000 nm 185 – 2000 nm
Color Temperature: N/A (not a blackbody source) N/A (not a blackbody source)
Nominal Bulb Power: 35 W 75 W
Typical Output Power:* 1.52 mW 6.13 mW
Warm-up Time:** 25 minutes 30 minutes
Source Lifetime: 1,000 hours
1,000 hours
Trigger/Shutter Input Signal: TTL; Up to 2.5 Hz maximum TTL; Up to 2.5 Hz maximum
Trigger/Shutter Connection: SUB-D-15 pin SUB-D-15 pin
Integrated Filter Holder: Yes No
Operating Temperature: 5°C – 35°C 5°C – 35°C
Operating Humidity: 5-95% without condensation at 40°C 5-95% without condensation at 40°C
Power Requirements: 85-264 V, 50/60 Hz 85-264 V, 50/60 Hz
Power Consumption: 50 W 105 W
Dimensions: 14.5 x 16.5 x 26 cm 14.5 x 16.5 x 26 cm
Weight: 6 kg 6 kg
Safety & Regulatory: CE; VDI/VDE 0160; EN 61010 CE; VDI/VDE 0160; EN 61011
Replacement Bulb: HPX-2000-BM HPX-2000-HP-DUV-BM

* Typical output power coupled into a 100 μm UV/VIS fiber and measured with an optical power meter integrated from 200 – 1100 nm

**  Warm up time @23 °C ambient, free airflow, no vibrations

PDF: HPX-2000 Installation and Operation Manual (only for models manufactured in the US)

Please use the following instructions for models manufactured in Germany

Measurement Techniques in which this product is used:

HPX-2000-HP-DUV spectra.xlsx