HR2000+ (Custom)

$4,460.00

Custom High Resolution Spectrometer for Maximum Flexibility

Availability:

Out of stock

The HR2000+ (Custom) spectrometer is a small-footprint, high-resolution spectrometer that is well suited for applications such as wavelength characterization of lasers and LEDs, monitoring of gases and monochromatic light sources, and determination of elemental atomic emission lines. Depending on spectrometer configuration, optical resolution as fine as  ~0.035 nm (FWHM) is possible. Also, users can add Ocean Optics accessories such as light sources, probes and optical fibers to configure a variety of application-specific systems.

 

Determine Spectrometer Range - Calculate Now

For more information, view:

  • Flexible – programmable microcontroller
  • Triggerable – triggering functions synchronize the spectrometer to other devices

Engineering Specifications HR2000+ Custom (user configured)
PHYSICAL
Dimensions: (L x W x H) mm and inches 148.6 x 104.8  x 45.1 mm (5.9 x 4.1 x 1.8 in.)
Weight: kg and lb 0.57 kg (1.26 lbs.)
DETECTOR
Type: Sony ILX511B
Range: 190 – 1100 nm
SPECTROSCOPIC
Wavelength range: 190 – 1100 nm
Integration time: 1 millisecond – 65 seconds (20 seconds typical)
Dynamic range: 2 x 108 (system); 1300:1 for a single acquisition
Signal-to-noise ratio: 250:1 (at full signal)
Grating: H1 – H14; HC-1
Slit: 5, 10, 25, 50, 100 or 200 µm wide slits
Optical resolution: ~0.035 to 6.8 nm (FWHM)
Stray light: <0.05% at 600 nm; <0.10% at 435 nm
Buffering: no
Fiber optic connector: SMA 905 to single-strand optical fiber (0.22 NA)
ELECTRONICS
Power consumption: 220 mA at +5 VDC
Strobe functions: 2 programmable strobe signals (single/continuous)
Interfaces: USB 2.0, 480 Mbps; 2-wire RS-232; I2C 2-wire serial bus
Temperature: -30° to +70° C Storage & -10° to +50° C Operation
Humidity: 0% – 90% non-condensing

Measurement Techniques in which this product is used: