TI300-Series Industrial Transmission Process Probes

TI300-Series Industrial Transmission Process Probes


Out of stock


Our industrial-grade transmission dip probes can be used in environments with pressure limits of up to 250 psi and at temperatures up to 300ºC. The robust stainless steel 1/2″ probe tip is ideal for integration into process lines, and mates easily to our spectrometers and light sources for measurement of absorbance and transmission in solutions.

  • Light is directed via one fiber through the open path, then is reflected by a mirror and redirected back to a receive fiber that returns the light to the spectrometer
  • Sample is free to flow through the tip
  • Vary the pathlength of your tip for solutions of different concentration (2 mm to 50 mm tips available)
  • Probe fits into a standard 1/2″ Swagelok fitting for installation into a pipe or reactor

Engineering Specifications TI300-Series Industrial Transmission Dip Probes
Fiber type TI300-UV-VIS: 300 µm UV/SR optical fiber (200 – 1100 nm)
Probe diameter: 12.7 mm (1/2″)
Probe length: 127 mm without probe tip
Tip length: 26 mm to 49.9 mm, depending on tip
Fiber length: 2 meters
Breakout: 1 meter from the end of the probe
Temperature limit: 300º C for probe body
Pathlength: 2, 5, 10, 25, or 50 mm (See product variations table for options)
Probe material: Stainless steel outer sleeve
Sampling tip optics: Quartz back-coated mirror and quartz lens
Sampling tip O-ring: Parker perfluoroelastomer (Parofluor ULTRA) O-ring seal
Pressure: 250 psi
Fiber jacketing: Fully interlocked stainless steel over Teflon tubing (total 7.0 mm outer diameter)
Connectors: SMA 905

Applications in which this product is used:

Measurement Techniques in which this product is used: